AKHH2 Hound Heater II Dog House Heater

Keep your outdoor pet indoor warm! The newly designed Hound Heater 2 is back and now features a four sided ventilation system that will effectively heat up to 16 cubic feet.The Hound Heater II will stay at a constant 130 degrees when the outside temperature is below freezing, keeping your pet warm and comfortable. A 60-75 watt bulb produces approximately 230 BTU's of dry, reliable heat. Draws 1.3 amps

The Hound Heater II will heat an average size dog house (typically 48" L X 24" T X 24" W -- approx. 16 cubic feet) with a 50,000 hour, 100 watt, wire resistance element. At 0 degrees F outside, the house will stay around 40 degrees F. If you need to warm a larger area, multiple heaters may be installed. (We recommend that a Thermo Cube be used to help regulate the temperature and save energy.)

Hound Heater II Dog House Heater Features at a Glance:
• 5-1/2" by 5-1/2" by 5-1/2".
• Easy to install in square dog houses
• Wall Mount Only! No Floor or Ceiling
• Uses 50,000 hour, 100 watt, wire resistance element
• 1 year manufacturer's warranty.

Mounting Instructions:
• Measure down the wall 7" and over 7" from a top corner of the dog house
• Drill a 7/8" to 1" dia. hole at the previous located mark.
• Run Hound Heater cord through your hole
• Mount 4 screws in the base of the Hound Heater.
• Put in your Heating Element. (bulb, ceramic emitter, etc.)